Sensor locating where along its cable water has been detected within a 15cm (6 inch) range. Ideal for detecting leaks in large area's (data centers, commercial buildings, warehouses, ...). Don't need the location of the leak, just an alert when water touches the cable? Then check out our Leak sensor

Industrial Water Leak Location Sensor

leak location sensor

How It Works Cable Install Guide Tech Specs

Power Over Ethernet (PoE). - Web. - Modbus. - SNMP - SNMP Traps - Email - SMS - Voice Call - Rack Mountable - Industrial Grade. - TraceTek TT1000 - IP 68.
non-relevant transparent gif
no pc required for the ServersCheck to operate once configured - detects leaks along its cable with an accuracy of up to 15cm (6 inch).
- can detect multiple leaks at the same time, with location for up to 2 sequential leaks
- 5m/17ft reusable water sensitive cable.
- optional cable lengths of up to 100m/300 ft available.
- expandable up to 100m/330ft per sensor.
- triggers an alert when water touches cable.
- plugs into the base unit.
- powered by the base unit.
- alerts via SNMP Traps, email, SMS or voice calls.
- IP68 housing: just put it anywhere under your raised floor and let it monitor for you.

Integration with BMS systems using Modbus TCP.
Integration with NMS through SNMP GET & SNMP TRAPS.

Works on the same principle as the traditional leak sensor but with the benefit of being able to pin point the location along the cable.
non-relevant transparent gif Some of ServersCheck's customers:

ServersCheck Internet Technology Companies customers
ServersCheck Technology Companies customers
ServersCheck customers from the Finance Industry
Some of ServersCheck's government customers
non-relevant transparent gif
US Made Leak Detection Cables.
Our water leak detection sensing cables are proudly manufactured in the USA.

The sensing cables are mechanically strong and resistant to corrosion and abrasion.

Durable. Reusable. Industrial grade. Protecting your infrastructure & facilities.
Swiss Made Logo
non-relevant transparent gif
How it works.
Haven't checked out the above video? Following illustration will show you how our water leak detection system works.

The flooding sensor connects to a base unit using a standard RJ45 network cable. The network cable tranmits data and power from the base unit to the water sensor. The sensor comes with a 5m/17ft reusable water sensitive cable. The cable can be daisy chained up to 102m/330ft. The cable is constructed of two sensing wires, an alarm signal wire, and a continuity wire embedded in a fluoropolymer carrier rod. The sensor constantly monitors the sensing cable for continuity.

Illustration showing how the leak location sensor works
non-relevant transparent gif
Leak cable installation guide
Leak sensor cable guide
Wondering how to setup the leak sensor or where to put the cables? We've compiled a quick guide that outlines the do's and don'ts for leak sensing cables.

Download guide
non-relevant transparent gif
Leak maps
at last see where your leaks are
Getting an alert when a leak is detected is great. But where is it? Find leaks is what makes the difference. And that's what ServersCheck does.

With the latest edition of our Monitoring Software or Monitoring Appliance you can now plot the leak sensors on your floor plans, building maps and the software will automatically change the color when a leak is detected.

Learn more
Thermal and Leak map sample
non-relevant transparent gif
Technical Specifications

Technical Specifications - Water Leak Sensor Probe (ENV-WLEAK-LOC)
Sensor specs:
Housing Dimensions: 65 mm (2.5") x 95 mm (3.74") x 55 mm (2.16").
Sensor Housing Material: IP 68 plastic housing.
Sensor Housing Colour: light gray.
RJ45 cable gland protection rating: IP 68.
Part number: ENV-WLEAK-LOC.
Cable specs:
Drying time Cable dries and resets within 15 seconds of removal from standing water
Standard cleaning method Wipe with clean damp cloth
High visibility yellow color
Cable temperature range: Maximum continuous operating temperature 174F (75C)
Length: 17ft/5m - can be extended up to 330ft/100m
Cable breaking strength (including connectors): 70lb / 32kg
Manufactured in the USA
Sensing cables are approved for installation in ordinary and hazardous areas.
Water Leak Sensing Cable: 5m/17ft cable to detect water on floors (ENV-WLEAK-5M).
Part number: ENV-WLEAK-5M
Data Output:
Provides a WET/DRY indication in SensorGateway
The SensorGateway is required for this sensor.
Requires SensorGateway v5.1+ with firmware 8+
Network communication protocols: SNMPv2,v3 XML, JSON, HTTP and Modbus TCP
Operating temperature range: 0C to +75C (32F to +167F)
Operating humidity range: < 90% rH (non-condensating).
Sensor connects via regular straight RJ45 cable to the SensorGateway.
Maxmimum distance between probe and SensorGateway is 100m/330ft when using a CAT6 or CAT7 cable (subject to cable quality and interference)